What's wrong here then?

Talk Electrician Forum

Help Support Talk Electrician Forum:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.

NozSpark

Seaman stains™
Supporting Member
Joined
May 28, 2008
Messages
12,324
Reaction score
129
Location
North Wales Riviera
I started a PIR today in an office where they write computer software. There are a few other issues but I thought that I'd post this picture for people to ponder.

IMG_20120507_104023.jpg


So forgive me being vague, it's intentional;)0

 
I started a PIR today in an office where they write computer software. There are a few other issues but I thought that I'd post this picture for people to ponder.
IMG_20120507_104023.jpg


So forgive me being vague, it's intentional;)0
Is this aimed at our less experienced colleagues, Noz?

 
Last edited by a moderator:
Hi intergrity earthing? Allthough I would say a C3

Is it the sleeving, I recon theres 71% yellow to 29% green. code 1 rewire.

 
I only said that as most of the sockets I use are the other way round I think.

Actually looking at it now I think most sockets are that way round although obviously they have twin earth's these days.

 
Last edited by a moderator:
I'll go with, socket hanging off the wall, single insulated cables on show, not to IP2x, socket not fixed correctly

 
And Sellers has it:) apart from others who knew and only aluded to it

Yes, there's no High Integrity Earthing anywhere in the property,,,, even in the server room

 
Last edited by a moderator:
I still think its fly lead cpc, the left screw is not tight so could cause tearing of insulation and the grey sheathing looks taken back a bit too much. Also the cpc wire is longer whilst not being a problem it's bad practise????

 
Top