Search results

Hi all, Does anyone use/wear Snickers APS waterproof trousers? If so, what do you think? Are they any good? ?:| How waterproof are they? Can you kneel in a puddle and still be dry? How well does the fabric wear? Thanks, J. :innocent

Hi there I thought the number related to the voltage rating? O.

Hi guys, I am after some waterproof work trousers. I'm not sure if I want some over trousers, or just waterpproof trousers. I am normally a snickers sort of guy (all my trousers are snickers), so I'm considering Snickers APS waterproof trousers. What does ever one else wear? They need to be...

Hi guys, What do most of you use H05RR-F or H05RN-F for outside flex? Thanks, J. :good night:

All, Got to fit a room stat into a Y plan (which doesn't have a room stat). Do I simply fit it in series with the HTG output from the controller (white wire to the mid port). So controller HTG goes to room stat common/L1. White wire to L3 But does L2 go to the Neutral terminal? (or do I...

Hi there, When I worked at Rolls Royce, we tested new MCBs and performed scheduled testing of existing MCBs. This was many years ago - where we had a custom made injector (testers weren't that common then). Nowadays there are some decent testers about - but they aren't cheap! :o MCCBs/ACBs...

correct -such that the cpc becomes a ring with the rest a radial. Often with hi solutions they require/specify larger csa cpcs O.

I think he deserves more than a medal! ;) O.

I have the Meggar PAT4DVF Nice piece of kit, not the easiest to use (but the larger keyboard is good compared to the Fluke) All depends on what you are after... its not really portable, not the quickest to use either.. I have a scanner with mine - does make it quicker, but only for repeat...

unfortunately you'll always find this :( In the last two weeks i've done some pat'ing - where class 1 kit had been passed when it had no earth. Table lamps had been passed with 13a fuses, melted plug top - list goes on. I also did some remedial work at an industrial machine shop, been...

Wait until you start playing with ACB's and current injectors ;) O.

hi guys Went back today. The value operates fine - its not sticking, no worn gears. The clicking is the motor deenergising and then reemergising around the midport position - hence its rocking and not stalled. Basically the was the value at fault - a faulty switch inside. A new value solved it...

Hi all, Got called to look at a boiler swap out, plumber had simply swapped the existing boiler for a new on, and added a pump overrun cable from the boiler to the pump. He never tested the correct operation of the old boiler first. Basically the new boiler seems to work ok, but the heating...

Hi guys, As these are trade/domestic they are lighter than most aluminium steps - 10.4Kg (ali tends to be 14Kg). The industrial versions are heavier. They won't get daily use - hence I'm happy not having the industrial versions. Anyone own a set? O.

Hi all, Does anyone have/use a Lyte Fibre Glass combination ladder like the following: http://www.ladderstore.com/glass-fibre-combination-ladder-pi-1536.html?image=0&osCsid=98b81f9f80501020352f89f7bf200c78 This is the light trade version (not the yellow industrial one). Thanks, O. ps -...

no such thing as a voltage breaker - waits to be corrected ;)

Hi there, I have come across this setup a lot! (Maybe its just a Midlands thing?) 50% have had PME labels/stickers, the others haven't. When I've checked in the past I have been told they are TNCS. But always check (by enquiry and/or measurement) if unsure. O.

Noz, If you are still struggling, drop me a PM. O.

Hi there, One thing to watch out for with PVC, is that in sun light/warm conditions it can sag. I have seen many jobs where its been used outside and the distance between saddles was too large and its sagged :( Instead of using galv domes (if you want to stay PVC) you could simply use one of...

Hi all, Does anyone know of an alternative motion sensor to a PIR (maybe Ultrasonic or Microwave)? Basically a PIR is being set off by the steam/flue from a condensing boiler in the cold mornings. I'm hoping there will be a solution that won't be susceptable Thanks, O.