ElectekAir
Well-known member
- Joined
- Jul 3, 2008
- Messages
- 449
- Reaction score
- 0
Turn on the lights 200 deg hot spot nowROTFWLby removing the insulation you have caused a cold spot around the fitting that may fail building regs if the spots are fitted to a loft space then use boxes over the spot and lay the insulation over that.
if the are cut into a vaulted/dormer ceiling and the void is fitted with kingspan I would not remove the insulation but tell the customer of the problems and the cold spots it would produce and would be a none compliance to building regs