starkweather
New member
hi everyone this is my first post
i installed led battens in a small seamstress room for a customer about 18 months ago ,the lights are on there very own circuit fed from split rcd board [just 2 lights and a switch nothing else]when i say installed i didnt wire the circuit only changed out the old fluorescent fittings .there 43 watt battens.the lights are fine until computer and printer are switched on then the lights give out the slightest flicker every 50 seconds ,any where else it wouldnt be a problem but because she is working with precise tools etc its driving her nuts.phoned manufacturer who asked for light code /serial number and he has emailed back saying they were a batch of faulty drivers and is sending out new fittings.my fear is this wont make any difference as i believe it to be some sort of interference with IT equipment .she has only started using room lately so its probably been an issue from day 1.its not a loose wiring connection [on twin and earths and exterior driver connections] and the lighting circuit is sound .i have no idea how cables are run for the sockets and lights. has anybody had this issue before .the make of the battens is integral led lightspan .
any help would be appreciated
thanks
i installed led battens in a small seamstress room for a customer about 18 months ago ,the lights are on there very own circuit fed from split rcd board [just 2 lights and a switch nothing else]when i say installed i didnt wire the circuit only changed out the old fluorescent fittings .there 43 watt battens.the lights are fine until computer and printer are switched on then the lights give out the slightest flicker every 50 seconds ,any where else it wouldnt be a problem but because she is working with precise tools etc its driving her nuts.phoned manufacturer who asked for light code /serial number and he has emailed back saying they were a batch of faulty drivers and is sending out new fittings.my fear is this wont make any difference as i believe it to be some sort of interference with IT equipment .she has only started using room lately so its probably been an issue from day 1.its not a loose wiring connection [on twin and earths and exterior driver connections] and the lighting circuit is sound .i have no idea how cables are run for the sockets and lights. has anybody had this issue before .the make of the battens is integral led lightspan .
any help would be appreciated
thanks