Heated Clothes Drier

Talk Electrician Forum

Help Support Talk Electrician Forum:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.

JOB

Member
Joined
Aug 7, 2023
Messages
5
Reaction score
1
Location
Maidenhead
Good afternoon,
This is a quick fix, but in no way something to leave. Drier out of warranty.
Original mains cable broke just outside entry to leg leaving a very short portion protruding. No way to get into leg to fit completely new cable.
Any thoughts on a safe robust fix?
Cheers
 

Attachments

  • IMG_6388.png
    IMG_6388.png
    5.5 MB
Good afternoon,
This is a quick fix, but in no way something to leave. Drier out of warranty.
Original mains cable broke just outside entry to leg leaving a very short portion protruding. No way to get into leg to fit completely new cable.
Any thoughts on a safe robust fix?
Cheers

Unless you can access more of the sheathed cable that enters the leg... Then, "safe and robust" are probably not an option...?

e.g. Although wiring regulations do not actually apply to plug-in accessories...
you can get some useful tips for electrically safe repairs from what BS761 wiring regs do recommend..

Such as reegulations 526.5 & 526.8, that require all terminations and joints to be within suitable enclosures with no exposed unsheathed, just insulated conductors... i.e. the Brown Blue & Green/yellow bits in your photos must NOT be exposed!!

Basically you need to be able to clamp the white sheathing of the two ends of flex inside of an insulated enclosure....
Once you have them clamped inside an appropriate enclosure.. then any suitable termination Screw/Wago etc.. would be ok...

BUT... from your photos, your problem is that you don't appear to have enough workable flex poking out from the leg... ??

The current arrangement looks potentially dangerous in my opinion..
And I would not like any of my close friends or family being near that while it is plugged in!!

£150 for a new one is cheap in my books compared to the possibility of a serous injury or fatality, as electricity can kill a healthy adult in less than a second?
 
No Geoff, can’t get into it and cost over £150, hence repair.
So commercially it is a barely viable repair, as a DIY repair is it worth the risk of a serious or fatal injury to a family member

The problem you have is looking at what little cable is still protruding from the unit there is no real viable safe repair that could be done unless you could custom 3D print a clamp / bracket to fasten a small junction box over the cable and make a joint that way.
One thing is certain that bodged temporary repair should not be put into service by any sensible person
 
Consumer electrical products are designed to be assembled, but by no means always to be disassembled. (That was the old days.) Look for screws hidden beneath trim, feet, labels etc. Plastic bits might need prising off.
Sometimes you need so much force it feels as if you'll break it, and sometimes you do break it.
Otherwise, if desperate, fix a robust plastic box to the dryer, put the connecting block inside, and secure the cables properly.
And please support right to repair (though requiring longer warranties would be even better.)
 
Top