Called out to an immersion heater today , it tested OK , 19ohms , mains supply across the element but no current on clamp meter :C Found the E7 controller to be faulty . Bridged it out , abandoned mains testers , & tried two voltage tests , one with the clamp meter leads , one with my Megger . Both read 262 V .
About 200 mtrs away is a sub station at the end of a line of pylons , to which I contribute that measurement . I've had 255V around Brum but not this much .
About 200 mtrs away is a sub station at the end of a line of pylons , to which I contribute that measurement . I've had 255V around Brum but not this much .
Last edited by a moderator: