flyingspark
Member
- Joined
- Mar 3, 2009
- Messages
- 48
- Reaction score
- 0
Hello, Sorry but another bonding question.....
I recently installed a 12v extractor fan in a bathroom which had never had any central heating radiators in it, until this re-fit. I installed the transformer for the fan is outside the bathroom, the only light switch is also outside the bathroom.
All of the pipe work supplying both hot & cold water, and the radiator are plastic from main intakes to just below the floor boards (a very short length of copper poking through), The new bath is Metal.
Basically, I have gone over the regs flicking back and forwards, humming and haring, supplementary bonding in this bathroom dont seem to make sense as potentially there is no potential if you know what I mean.
Any advice would be much appreciated.
I recently installed a 12v extractor fan in a bathroom which had never had any central heating radiators in it, until this re-fit. I installed the transformer for the fan is outside the bathroom, the only light switch is also outside the bathroom.
All of the pipe work supplying both hot & cold water, and the radiator are plastic from main intakes to just below the floor boards (a very short length of copper poking through), The new bath is Metal.
Basically, I have gone over the regs flicking back and forwards, humming and haring, supplementary bonding in this bathroom dont seem to make sense as potentially there is no potential if you know what I mean.
Any advice would be much appreciated.