Plumb Bob ?

[Evans Electric]

Anyone know where I can get my Plumb Line calibrated for accuracy ?

Its now on the re-assessments for Part Pee .   Oh and the bubble in your spirit level  must have a BS kite mark .

And all chalkline twangs  must now be notified to Local Building Control .

 

[betty swollocks]

I got knocked back on my assessment for not having a clear label on my left hand screwdriver ...... And apparently its no longer acceptable to write a risk assessment on the back of a pack of 20 Rothmans!

 

[ProDave]

You can get the spirit level bubble re charged by the same people that re-gas plasma tv's.

Not sure about the plumb bob, it's a different calibration factor up here, a bit like a difference in magnetic north offset.

 

[Evans Electric]

Ah!  Never thought of that TBH , yes of course, nearer the  pole  a Pumb line from the Midlands is not going to be accurate,  And of course would be no good at all in the Southern Hemisphere  .

 

[m4tty]

:slap

 

[pewter]

I got knocked back on my assessment for not having a clear label on my left hand screwdriver ...... And apparently its no longer acceptable to write a risk assessment on the back of a pack of 20 Rothmans!

I believe its ok if you have superkings

 

[Elmer BeFuddled]

And apparently its no longer acceptable to write a risk assessment on the back of a pack of 20 Rothmans!

I was informed that the back of a *** packet is acceptable if the "Smoking Kills" warning is still legible. That was a B&H pack though.

 

[SLIPSHOD & SLAPDASH]

I have a plumb bob check string in my office. The Niceic man said as long as we regularly compare the results, and keep a log book thats all we need to do.

 

[philbas]

Ah!  Never thought of that TBH , yes of course, nearer the  pole  a Pumb line from the Midlands is not going to be accurate,  And of course would be no good at all in the Southern Hemisphere  .

In the Southern Hemisphere it would hang upside down, so different calibration needed.

 

[SPECIAL LOCATION]

Has anyone else seen these new fully insulated plumb-bobs?

I was asking Megger Mark for a price on a new tape measure the other day...

Cuz mine wont retract within 200ms anymore..

(yes.. I know its OK for a 5M tape to retract within 400ms if measuring safe zones...

But when using them around unskilled persons the NIC get a bit stroppy if it wont retract, and lock within 200ms)

Anyway MM told me he could do a deal on a calibrated tape measure meeting 200ms 5M retraction..

and a fully insulated plumb bob at 20% off cost price, but he's not getting them in till the end of the month...

Still waiting for him to PM me some links but I think he said they were Makita????

:coat

 

[Sharpend]

Ah yes but are they compatible with 17th edition or are they the old stock from the 16th edition?

 

[Evans Electric]

HHmmm  Yeeeeeessss   ...very interesting   Ashley   :C   

 

[Evans Electric]

:C :C  What happened to him ?

 

[a3]

After being reported I assimilated him for spamming, he had already had one warning from the moderator team

 

[Evans Electric]

Holy Cow !!  What does "Assimilated"  mean ? 

 

[kme]

I think that`s what happens when ( Mr. I`m not saying his name) actually comes to get you...... :slap

Just don`t tell him I said so.