PVC Conduit bends

[Evans Electric]

I bought 10 of these a couple of years ago from the old Clearlight who are now Denmans. Have been trying to identify the maker ever since . They said they were Marshal Tufflex but theres have the big ugly couplers on each end as do all the others I see.

I thought these were very neat and obviously the radius is perfect . I still either use the coupler ones or pull them over my knee but would like to buy these if I could find them .

Anyone familiar with them ??

 

[Zeespark]

I sometimes use them Deke, alot quicker than faffing around with a bending spring, and you can guarantee the cable radius's with them.

AndyGuinness

 

[Evans Electric]

Yes but do they have the couplers glued to each end Zeebrugge? I'm after these that have no couplers , nice neat fit onto conduit.

 

[Zeespark]

Does this help Deke? :

20mm White PVC Slip Bend

AndyGuinness

 

[Steve3948]

Well judging by that then MT must be Marshall

 

[Badfish]

I have used them in the past. I either got them from my local wholesaler or from electric centre. I will check at my wholesaler tomorrow morning.

 

[batty]

They are definitely Marshall Tufflex I use them a lot.

 

[Evans Electric]

Well done Zeebrugge , thanks guys , Electric Centre I have an account with .

And they refer to them as "Slip Bends"

I actually gave one to Denmans and said get me a load of these ....... what turned up had the couplers on . Now I know what to ask for .

Or order some from TLC .

Thanks guys.

 

[batty]

Did you know if you are short of couplers you can cut a piece of the end of the slip bend and use that as a coupler it may get you out of trouble if you run out one day.

 

[Zeespark]

Deke, TLC only supply those slip bends in white according to them, so you may have to hunt around for them in black.

AndyGuinness

 

[Evans Electric]

Thanks M8 don't use much white TBH Now I know they are MT I should be able to order some in .