a double socket is only rated 13A between both outlets. check the back of just about any socket and it will say '13A'the way it was looking was a spur from a spur, which is un acceptable, however what got me thinking as its two 13amp fcu, its the same as 1 double socket, 26 amps on 27 amp cable, not that it would pull that much anyway
you shouldnt take 2 spurs from same point. although you could extend the ring to include the 2 SFCU. or take a spur from 2 different socketsisn't this socket on the ring? Then just add both fused spurs onto the ring?
I meant it as in, adding each fused spur plate onto the ring circuit, not spuring off the same socket if you get me.you shouldnt take 2 spurs from same point. although you could extend the ring to include the 2 SFCU. or take a spur from 2 different sockets
that would be the best methodI meant it as in, adding each fused spur plate onto the ring circuit, not spuring off the same socket if you get me.So each fused spur is on the ring final circuit.
Enter your email address to join: