SolaX Triple Power Battery Balancing

[spacemoc]

There appears to be a lack of information available on how to properly balance SolaX batteries. Here are the steps:

1. Force discharge the batteries down to 10%.
2. Shut down the master battery and disconnect the slave battery.
3. Short the master battery, then reconnect it to the inverter and power it back on. You should see a state of charge (SOC) on the inverter that is significantly higher than 10%.
4. Discharge the master battery down to 10%.
5. Once complete, reconnect the slave battery and return the system to normal operation.

At this stage, both batteries should be at the same SOC (10%).

However, there is one issue: the master battery will not operate without at least one slave. So, how does one balance the master and slave when only two batteries are available?

 

[binky]

Not familiar with these batteries, but I would be rather surprised if the master cannot work alone.

 

[spacemoc]

Not familiar with these batteries, but I would be rather surprised if the master cannot work alone.

Question is what does it mean: short the master battery?

 

[Geoff1946]

Question is what does it mean: short the master battery?

I very much doubt it means what it says! Looks like a typo or mistranslation to me.

 

[binky]

Question is what does it mean: short the master battery?

Shorting any battery is dangerous, so I'm not sure. It may well be worth a look for a YouTube video on how to do what you want to do.

I think your battery can be set for forced charge via the app, so basically it fully charged them from the grid, which is another way of balancing them out that I have used on other batteries.

 

[binky]

Here's one video