That's the car ramp fixed.

[Geoff1946]

There have been dire warnings on here occasionally regarding the dangers of interfering with limit switch wiring. I thought this image illustrated the point well.

Sorry I don't know the story behind it; just an internet find.

 

[Rob.]

It's also a photoshopped image..

 

[roys]

It's also a photoshopped image..

Genuine question Rob, How do you know?

 

[Rob.]

Just look at how badly drawn the "crumple zones" are. In this case it's very obvious. 

 

[Sharpend]

I agree the drawn in lines are terrible, are they crumple faster lines? Or have they been drawn in for added effect but the picture/event was real? 

 

[kerching]

It's nothing a bit of filler won't cure

 

[OnOff]

T-Cut?

 

[kerching]

T-Cut?

I prefer Farecla G3. It's a bit coarser to start with but will give a good result. One of those"  .glue on" puller pads may help

 

[OnOff]

Funnily enough I've just bought an Aldi portable bandsaw for cutting up some 80 and 100mm box section. Plan is to make a car rotisserie. Getting tired of always cutting with an angle grinder for 40 years now hence the bandsaw. 

Will have the option to lift via farm jacks or a couple of old Tirak winches if I can coax them back into life.

Aka another unfinished project!

 

[kerching]

Aldi portable bandsaw

I was tempted with those, but didnt

are they any good??

 

[OnOff]

I was tempted with those, but didnt

are they any good??

It's the Sheppach one. People praising them over in the mig welding forum. This sort of result: