An old smoke/gas room now used as a store, storeman complained about getting a tingle off front of old DB when he touched it.
New cu required & new lighting + new sockets & all conductors in tube needed rewiring, MICC tested ok so was reused.
Supply is via a 2c 10mm MICC off of 60amp iso from main chamber across the carpark.
The old cu
http://i83.photobucket.com/albums/j293/gazjothomas/DSC00325.jpg
The dark store area, old lighting non operational fuses keept blowing (0.00 IR)
http://i83.photobucket.com/albums/j293/gazjothomas/DSC00326.jpg
Sockets required here
http://i83.photobucket.com/albums/j293/gazjothomas/DSC00327.jpg
Old light fitting burning on the cover so bad a hole has appeared.
http://i83.photobucket.com/albums/j293/gazjothomas/DSC00332.jpg
Another old fitting that wasnt working, site handyman said the fitting was burntout Wet Fish.
http://i83.photobucket.com/albums/j293/gazjothomas/DSC00338.jpg
New sockets in
http://i83.photobucket.com/albums/j293/gazjothomas/DSC00337.jpg
New lighting in
http://i83.photobucket.com/albums/j293/gazjothomas/DSC00336.jpg
http://i83.photobucket.com/albums/j293/gazjothomas/DSC00339.jpg
New cu going in
http://i83.photobucket.com/albums/j293/gazjothomas/DSC00328.jpg
New cu in & lighting switching junctions above.
http://i83.photobucket.com/albums/j293/gazjothomas/DSC00329.jpg
I have rearranged the circuits to cut down on circuits, such as one circuit for all 6 sockets, lights split over two circuits & fume/smoke extractor circuit disconnected as not now in use.
For those that have not seen or used Piranha earthing nuts...
http://i83.photobucket.com/albums/j293/gazjothomas/DSC00335.jpg
New cu required & new lighting + new sockets & all conductors in tube needed rewiring, MICC tested ok so was reused.
Supply is via a 2c 10mm MICC off of 60amp iso from main chamber across the carpark.
The old cu
http://i83.photobucket.com/albums/j293/gazjothomas/DSC00325.jpg
The dark store area, old lighting non operational fuses keept blowing (0.00 IR)
http://i83.photobucket.com/albums/j293/gazjothomas/DSC00326.jpg
Sockets required here
http://i83.photobucket.com/albums/j293/gazjothomas/DSC00327.jpg
Old light fitting burning on the cover so bad a hole has appeared.
http://i83.photobucket.com/albums/j293/gazjothomas/DSC00332.jpg
Another old fitting that wasnt working, site handyman said the fitting was burntout Wet Fish.
http://i83.photobucket.com/albums/j293/gazjothomas/DSC00338.jpg
New sockets in
http://i83.photobucket.com/albums/j293/gazjothomas/DSC00337.jpg
New lighting in
http://i83.photobucket.com/albums/j293/gazjothomas/DSC00336.jpg
http://i83.photobucket.com/albums/j293/gazjothomas/DSC00339.jpg
New cu going in
http://i83.photobucket.com/albums/j293/gazjothomas/DSC00328.jpg
New cu in & lighting switching junctions above.
http://i83.photobucket.com/albums/j293/gazjothomas/DSC00329.jpg
I have rearranged the circuits to cut down on circuits, such as one circuit for all 6 sockets, lights split over two circuits & fume/smoke extractor circuit disconnected as not now in use.
For those that have not seen or used Piranha earthing nuts...
http://i83.photobucket.com/albums/j293/gazjothomas/DSC00335.jpg