cheap CU wasn't too bad

Talk Electrician Forum

Help Support Talk Electrician Forum:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.

Lee321

Distinguished Member
Joined
Sep 8, 2008
Messages
2,141
Reaction score
0
constructive comments welcomed

cu3.jpg


.

CU2.jpg


yuk

.

olddb.jpg


 
Where's that one from, and what's cheap?

Board looks tidy enough, apart from the inch of copper at the main switch terminals. ;) I also strip a bit more outer insulation back to aid identification, just a personal preference.

 
Where's that one from, and what's cheap?Board looks tidy enough, apart from the inch of copper at the main switch terminals. ;) I also strip a bit more outer insulation back to aid identification, just a personal preference.
 
Thats damn cheap. We'll have to see how long it is before you get called back for a problem, there again might be sound as a pound.

Where did you pick it up from?

 
I must say...

... That board looks very nice.

 
Did you get it from a wholesaler in Leeds, Mate?

 
Same opinion as lurch regarding the tail copper.

The unused conductors should also be terminated to earth and not just taped up

 
Looks ok how come some of breakers are different. Mk are annoying there RCBO's have changed, switch is in a different position.

 
Same opinion as lurch regarding the tail copper.The unused conductors should also be terminated to earth and not just taped up
thats a really good idea terminsting any brown, black grey or other colours that arnt used, to earth urm not! :| if i saw those unused cables terminated to earth id assume they where used earth wires, but if i saw them taped up id know straight awau they where unused ;)

 
is there a logic to the way you do a board? ie.. earths first?
Depends on the board, but usually something along the lines of...

  • Remove CU from box
  • Remove pan
  • Fit base to wall and dress cables in in logical manner
  • Strip all cables
  • Terminate earths
  • Terminate neutrals
  • Fit pan and tails
  • Fit MCB's
  • Terminate phase cables
  • Power up

 
thats a really good idea terminsting any brown, black grey or other colours that arnt used, to earth urm not! :| if i saw those unused cables terminated to earth id assume they where used earth wires, but if i saw them taped up id know straight awau they where unused ;)
This is one of those the NIC say its best to dobad day explode

 
This is one of those the NIC say its best to do
They say a lot of things, like women. Just pretend to listen to stop them from going on, and the same goes for the NIC.

 
From some of the views on the forum though, it sounds as though its only useful for wiping your a-hole on:p

 
Top