L-E_Fault
Senior Member
- Joined
- Mar 23, 2009
- Messages
- 423
- Reaction score
- 0
A few weeks ago my boiler tripped the RCD and would not set. I switched the spur feeding the timer clock off and it set. So thought it could of been the clock so I replaced the clock, it still trips.
Then I bypassed the clock at the boiler to just run it of the stat and all was fine until recently. It shows a fault at the boiler.
And then as if by magic it fixed its self and started to work, that lasted 3 days and now it's broke again.
I'm thinking pcb (I'm also thinking I'll never buy ferroli after this)
I've got a pregnant mrs who's moaning she's cold, it's starting to hurt my ears.
Cheers
Then I bypassed the clock at the boiler to just run it of the stat and all was fine until recently. It shows a fault at the boiler.
And then as if by magic it fixed its self and started to work, that lasted 3 days and now it's broke again.
I'm thinking pcb (I'm also thinking I'll never buy ferroli after this)
I've got a pregnant mrs who's moaning she's cold, it's starting to hurt my ears.
Cheers