honeywell thermostat with horstmann

[there]

HI can i have help with the wiring from a honeywell 3 terminal to a horstman three terminal i need to make sure where the live permenant live and neutrral are on both units im not even sure the previous electrican has wired the old honey well in the right terminal

please can anyone explain the right terminal the honey is the old mercury style type with a dial

many thanks

 

[steptoe]

could really do with model numbers of the 2 stats,

or pictures of the connections at the very least,

most of them are the same, but there are a few odd-ball ones out there,

---------- Post Auto-Merged at 17:05 ---------- Previous post was made at 17:04 ----------

ps, if you look inside the cover there is sometimes a wiring diagram stuck in there.

 

[Doc Hudson]

Welcome to the forum, as Steptoe says Honeywell and Horstmann do make a lot of devices. Without some model / part numbers any advice give could just be a bit of a guess.

Doc H.

 

[a1]

Hello and welcome to the forum.

A picture of your current set up as it is would be good.

http://www.talk.electricianforum.co.uk/your-pictures/18325-how-do-i-upload-image-attachment-talk-electricianforum-co-uk.html

 

[there]

double post sorry please see below

 

[there]

here we go as requested sorry for the delay was uploading pictures thnaks

 

[steptoe]

righty ho,

looks like you have a sparkly new battery operated no volt stat,

so no neutral required at it,

permanent live to term 1

switched live to term 2

 

[there]

on the honey well i image i posted please could you tell me what cables are

permanent live

switched live

is it the blue brown or grey

on the honeywell at the moment the blue is in terminal 1 the brown in two and the grey in 3 i was told that the switch live should be in terminal three in the honeywell and terminal 1 is live terminal 2 is neutral which is right as i look at the honeywell

---------- Post Auto-Merged at 20:09 ---------- Previous post was made at 20:00 ----------

its ok thanks i got it on my honeywell the

brown is permentant live in terminal 1

the blue is neutral in terminal 2

and grey is switch live in termainl 3

--------------------------------------------------------------------------------

on the horstman its as steptoe pointed out

permnant live in terminal 1 (brown wire in my case)

switch live in terminal 2 (grey wire in my case)

and

parking in terminal 4 (blue wire in my case)

please do not follow my guide lines you wires will be completly different to mine you need to follow your own as cables are not by color they could be anything from live neutral or switch live this is just a guide many thanks to everyone in the forum

honeywell do not have there terminals from 1 to 4 its 2 1 4 3 how wierd anyway

 

[mikel]

Be careful!!!!!!!!!! You told us in you in your last post that blue was neutral and then said it was the switched live. You need to make sure which wire is which before you make any connections and get a big bang if you get it wrong

 

[there]

Be careful!!!!!!!!!! You told us in you in your last post that blue was neutral and then said it was the switched live. You need to make sure which wire is which before you make any connections and get a big bang if you get it wrong

\

yes sorry your right i have amended the post now

as i were

------------------------------------------------

honeywell

brown is permentant live in terminal 1

the blue is neutral in terminal 2

and grey is switch live in termainl 3

-------------------------

horstmann

brown permenat live terminal 1 in

grey is switch live terminal 2

blue is neutrel parking terminal 4

this is only in my case read up your own manual for your settings

ONCE AGIAN PLEASE FOLLOW YOUR OWN GUIDES DO NOT FOLLOW MINE AS YOUR CABLES COULD BE COMPLETY DIFFERENT TO THE UNIT ON MY HONEYWELL AS DIFFERNET COMPANIES WIRING THERMOSTATS DIFFERENTLY

DO NOT USE MY GUIDE MAKE SURE WITH YOUR OWN MANUFACTOR

JUST WAS FOR MY GUIDELEINES ONLY AND FOR MY HONEY WELL UNIT that honeywell recommended to me FOR YOUR UNIT READ UP ON

I DON NOT ANY WAY RECOMMEND YOU FOLLOW MY GUIDELINES BEST TO READ YOU OWN MANUAL

THNAKS