AAAMUSEMENTS
Senior Member
- Joined
- Jul 29, 2009
- Messages
- 422
- Reaction score
- 0
Classy or what...
At least you have got some buttons and switches when the fuse trips!Classy or what...
oh vicar! innuendo....I've seen worse..........
Love the wood
mmmmThat 16 amp has all the lighting circuits. It originally had a 5 amp in it but that used to go if too many lights were on.
only on special occasions......................oh vicar! innuendo....
isn't that what you GF says???:OBlushing] ] ]
GULP. Hope its not 1.0mm cable or worse then.That 16 amp has all the lighting circuits. It originally had a 5 amp in it but that used to go if too many lights were on.The yellow is a 20 amp, for the immersion heater.
ohhh!!!!! :OBlushingBlushingO)only on special location's......................
PMSL ROTFWLohhh!!!!! :OBlushingBlushingO) :^O :^O:^O
ROTFWLROTFWLROTFWLROTFWLROTFWL
That doesn't sound good..That 16 amp has all the lighting circuits. It originally had a 5 amp in it but that used to go if too many lights were on.The yellow is a 20 amp, for the immersion heater.
2.5 mm I think.
Yes, most likely. I was referring to the immersion cable being 2.5mm, the lighting is almost certainly 1mm.from the picture..
it would look IMHO to be more 1.0mm ish..
i.e.
far right 32A is probably 1 x 4.0mm or 6.00m
next 32A looks like 3 x 2.5mm
then the 16A looks like 3 x 1.0mm
:|
Where about's are you?I am well aware the whole installation is extremely dodgy and needs to be changed, we have been trying to find an electrician willing to do it for the last 3 years.
Near PeterboroughWhere about's are you?
I remember that thread now.
But its not just Wylex all the older boards have live accessible parts thats how they where made.love the bare busbar too under the main switch. Good old Wylex boards...
Enter your email address to join: