husky2013
Senior Member
- Joined
- Jul 10, 2011
- Messages
- 682
- Reaction score
- 0
Hi every1, thought i would share with you my project that i started tonight!
As a bit of practice for me as im wishing to go into training to become an electrician streetlighter helped me design & begin to setup a practice board for me!
here are some pics of how i have progressed! only started it at 6pm this evening so i dont think iv done bad TBH, what ya reckon........
i started out by mounting the Consumer Unit in the central of the board.
then started setting out where i wanted some sockets, and a switched fuse spur. i also positioned a metal clad light switch and a cooker control unit.
then i began surface clipping 2.5mm T&E cable and forming it around some corners to enter into the back boxes via knockouts.
the 1st circuit is a Ring Final.
once i had clipped the cable and stripped the cores, i then terminated into the sockets and replaced socket faces.
and this is the final part untill i do my 1st continuity tests before terminating into the board
i am very pleased with myself with this as iv never had any electrical training in the past, aside from my 2377 PA Testing :Salute
Thanks for looking i was so pleased with myself i wanted to share it with you all!
As a bit of practice for me as im wishing to go into training to become an electrician streetlighter helped me design & begin to setup a practice board for me!
here are some pics of how i have progressed! only started it at 6pm this evening so i dont think iv done bad TBH, what ya reckon........
i started out by mounting the Consumer Unit in the central of the board.
![PracticeBoard009.jpg](https://proxy.imagearchive.com/2ee/2eeaee8f6b5d7b43e9163ea72cabbb58.jpg)
then started setting out where i wanted some sockets, and a switched fuse spur. i also positioned a metal clad light switch and a cooker control unit.
![PracticeBoard010.jpg](https://proxy.imagearchive.com/dfa/dfacc05952879ff6b1e3117ef4edcf58.jpg)
![PracticeBoard011.jpg](https://proxy.imagearchive.com/c7c/c7cfc2f69d26488c768397b08c530cb6.jpg)
![PracticeBoard012.jpg](https://proxy.imagearchive.com/606/6061f318907e883b7e4e5e97487b82c2.jpg)
then i began surface clipping 2.5mm T&E cable and forming it around some corners to enter into the back boxes via knockouts.
![PracticeBoard013.jpg](https://proxy.imagearchive.com/b1e/b1edeef2aeaf096181572e3556f30300.jpg)
![PracticeBoard014.jpg](https://proxy.imagearchive.com/0d8/0d8a2af1c31ad5125f8cb22b5e4ac5a3.jpg)
the 1st circuit is a Ring Final.
once i had clipped the cable and stripped the cores, i then terminated into the sockets and replaced socket faces.
![PracticeBoard015.jpg](https://proxy.imagearchive.com/e5b/e5b1daf1ea1e828db6ffd72dc06a6036.jpg)
![PracticeBoard017.jpg](https://proxy.imagearchive.com/f60/f609b6f2689a83657df4896ecc46ff19.jpg)
![PracticeBoard019.jpg](https://proxy.imagearchive.com/c1f/c1fc40625925ccc2b994f2715159cae4.jpg)
and this is the final part untill i do my 1st continuity tests before terminating into the board
![PracticeBoard021.jpg](https://proxy.imagearchive.com/8fb/8fb96f5eb08ea704e4b2f81629694e19.jpg)
i am very pleased with myself with this as iv never had any electrical training in the past, aside from my 2377 PA Testing :Salute
Thanks for looking i was so pleased with myself i wanted to share it with you all!