PIR Light Connections

[babulmiah]

Hi,

Would someone be able to help me with the wires in the picture, which would go to brown, blue and earth wire?

Trying to connect pir light which I disconnected many years ago.

Thanks

 

[johnb2713]

Please take another photo, that ones making my eyes go funny.

 

[babulmiah]

Hi, sure, i will take one in the morning and post.

 

[mort2376]

It looks like (and this is at your own risk) Brown - Black.
Blue - White.
Earth - Green & Yellow.

The blue wire looks like a return to possibly allow a second lamp to be added, so I'd put it in a separate connector block.

This is only my opinion from tracing where the cables go in the fitting on the photograph.

It's a made in China fitting using hot and cold wiring references, but that blue is the odd one.

If in doubt get an electrician in who can test the unit.

 

[babulmiah]

Hi, please see updated picture.

 

[Geoff1946]

Isn't Kingfisher B&Q ? May be worth asking them.

 

[keefeebee]

https://acrobat.adobe.com/link/review?uri=urn:aaid:scds:US:0cf12260-0970-370f-a3d7-1db0f335a8d2This may help?

 

[babulmiah]

Thank you, have been searching everywhere

 

[keefeebee]

It looks like (and this is at your own risk) Brown - Black.
Blue - White.
Earth - Green & Yellow.

The blue wire looks like a return to possibly allow a second lamp to be added, so I'd put it in a separate connector block.

This is only my opinion from tracing where the cables go in the fitting on the photograph.

It's a made in China fitting using hot and cold wiring references, but that blue is the odd one.

If in doubt get an electrician in who can test the unit.

Agreed and further, I think, the blue and white wires were paired in the manufacturers original connector block