That damn screw

Talk Electrician Forum

Help Support Talk Electrician Forum:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.

dave2

Well-known member
Joined
Apr 14, 2008
Messages
239
Reaction score
0
Location
Co.Durham
A customer asked me to put up some of his chandeliers before he moves into his new house.

The house is being renovated and downstairs flooring is being lifted in places so that a woodworm treatment can be applied.

Guess what, I dropped the little grub screw which holds the rose in place and down into the foundations it went.--lost

Its a brown coloured small thing and i cannot source one anywhere.

Can anyone help with a supplier?

I must have thrown loads of these away over the years but I have learned my lesson now

dave

 
Any idea of the size it was?

If so cut a pin down to secure it.

 
What about getting a magnet and sweeping it quickly over the general area, recovered a few dropped bits over the years with a magnet. It is a pleasent surprise when you look at the magnet and find that dropped screw, spring, clip, swarf etc.

 
What about getting a magnet and sweeping it quickly over the general area, recovered a few dropped bits over the years with a magnet. It is a pleasent surprise when you look at the magnet and find that dropped screw, spring, clip, swarf etc.
+1 I've got one of them magnet things on an extendable car ariel which is well handy when you drop things especially engine bolts which always seem to land on something instead of dropping on the ground. Hth

 
Forsythes first law clearly states.

No matter what what you drop or where you drop it the item will fall into the most inaccessible place within the shortest amount of time and occasion the maximum amount of damage during its travel.

Forsythes second law clearly states.

The amount of damage caused will be inversely proportional to the value of the item and the availability of a replacement part will be directly proportional to its retrievability factor... :coat

 
Top