Hi I have a hot tub the plate says 230 volts it has a 32amp blue round plug can this be swapped out for a standard 3 pin plug as I'm told the wire it's on isn't 32 amp or do I need a sparky to install a 32 amp socket outside for it to connect too
Advice
- Thread starter jay81
- Start date
Help Support Talk Electrician Forum:
So I should get a electrician to put a special socket in for it then thank you for clearing that up
No nothing on it it's definitely not a 32 amp cable seems too thin looks like standard cable
Fleeting
Well-known member
- Joined
- Mar 27, 2021
- Messages
- 1,708
- Reaction score
- 565
Might be worth asking Master Spas.
https://www.masterspas.co.uk/
https://www.masterspas.co.uk/
Hot tubs generally have a 3Kw heater and 2 or 3 pumps with ratings of anything from 1.0 to 3 HP each ( 3 to 9A approx ). Most of the tubs I have worked on when when the heater and all pumps are running the load is generally around 17 to 20A you will also need some overhead on the OCPD to cover the inrush of the pumps starting
im no expert, but the minimum 25a that it says on it may be higher than than the max of 13a you can get from a normal plug. i mean you could get 25a from a 13a plug, however chances are you'll also get some smoke from it too, and once that comes out, its hard to get back in
Similar threads
