CEF Floodlights

Talk Electrician Forum

Help Support Talk Electrician Forum:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.
Joined
Oct 22, 2010
Messages
14,616
Reaction score
1,163
Location
Home for the terminally bewildered, one step ahead
Before anyone says it’s my fault for using them I KNOW!

I have a site with 18 of these 50W PIR Excite/Tamlite flood lights. They have been in 3 years, warranty is 3 years. Warranty finished Oct 1st

In the last 3 years they have failed frequently, either
Dead
Flashing slow
Flashing fast
Flashing so fast they make you feel ill
Dead
Constantly on
On for a few seconds then off

We were advised to fit an SPD to the board ( 3 phase and NOT cheap )

We now have a further 2 failed, 1 flasher 1 dead just out of warranty

Fun fact. These are installed INDOORS in a warehouse and are used to illuminate picking bays. There are periods where some may not be activated for days due to order-pick patterns

Has anybody else had this issue, it’s it just me, is it ghosts?

"Fortunately" ( or not ) these are in one of my sons warehouses so the labour element of constantly changing these is not really an issue

Project required 18 units. To date I have been supplied with 32 and credited with 28
 
what voltage is the site, I am of the opinion many floodlights are specced too low, and given a few voltage spikes, it takes them down. Other issues I've encountered is KSR battens - the PCBs were specced at 30C so during a short heat wave.....
 

Latest posts

Top