Electrical Tools List...

[welshwizard]

For those who are wishing to join the trade...

 

[SPECIAL LOCATION]

For those who are wishing to join the trade...

Thats a pretty short list?

wont need a big tool box or girlie tool bag to carry that?? ?:| ? :|

 

[kme]

Screwdriver selection will probably be a good place to start.

Choice of wire cutters / strippers / pliers.

Hacksaw (large and junior)

plasterboard saw.

Stanley knife.

Meter(s)

Cordless drill with large selection of bits (wod / metal / mason)

SDS drill with selection of bits and chisels.

4.5" angle grinder. Possibly 9" as well.

Jigsaw. Circular saw.

Handsaw.

Tape measure, chalk line, level. Possibly laser level.

Steps.

Hammer (std & lumpa) & chisel/bolster selection

Holesaw selection.

PLUS (dependant on area of work):

super-rods

heat gun.

trowels, buckets, float, sponge.

I`m sure to have missed a few stuff...... (including something blindingly simple)

 

[welshwizard]

Thats a pretty short list?wont need a big tool box or girlie tool bag to carry that??? :| ?:|

:^O .

No - Just carry them around in your pocket.

I was looking for tools inclusive of sizes, makes etc.

 

[kme]

Blimey - special slipped that in without me noticing (fwarrr fwarrrr)

"girlie bag" - wizzer??????? :^O :^O:^O:^O

 

[welshwizard]

Ah, Now there's a chap who knows what I meant.

 

[kme]

:^O .No - Just carry them around in your pocket.

I was looking for tools inclusive of sizes, makes etc.

Don`t want flippin much, do ya? ?:|

Happen I`ll weigh `em too, so your sad suspension doesn`t cave in:^O:^O:^O:^O

 

[welshwizard]

In the picture with my toolbox, on another thread KME.

 

[welshwizard]

Vde

 

[welshwizard]

Stop whinging, KME.

Aww Bless.

 

[SPECIAL LOCATION]

Ah, Now there's a chap who knows what I meant.

Ah well that KME...

teachers pet!

I bet he took an apple to school for the teacher as well..

and handed all his homework in on time!!!!! ]

 

[kme]

1. I am not whingeing.

2. Yes, I know where the girlie bag was, in the photos of your workshop. ]Thank you anyway. :x

3. :^O :^O:^O:^O

 

[SPECIAL LOCATION]

Screwdriver selection will probably be a good place to start.Choice of wire cutters / strippers / pliers.

Hacksaw (large and junior)

plasterboard saw.

Stanley knife.

Meter(s)

Cordless drill with large selection of bits (wod / metal / mason)

SDS drill with selection of bits and chisels.

4.5" angle grinder. Possibly 9" as well.

Jigsaw. Circular saw.

Handsaw.

Tape measure, chalk line, level. Possibly laser level.

Steps.

Hammer (std & lumpa) & chisel/bolster selection

Holesaw selection.

PLUS (dependant on area of work):

super-rods

heat gun.

trowels, buckets, float, sponge.

I`m sure to have missed a few stuff...... (including something blindingly simple)

Crimp tool???

Voltstick??? (or do you class that under meters?)

an MCB lock off device... to impress your part P assessors

 

[welshwizard]

Teachers pet. :^O

I bet you WAS and you did take your teacher an apple - Didn't ya?

Come on - you can tell the boys, we promise not to laugh - Too much.

]

:^O

 

[welshwizard]

Crimp tool???Voltstick??? (or do you class that under meters?)

an MCB lock off device... to impress your part P assessors

Now, There's another chap who knows what I am on about.

 

[SPECIAL LOCATION]

Vde

You can get that seen to down at the doctors!

no need to bring it up here? ]

just give em a call in the morning to make an appointment! :^O :^O:^O

 

[welshwizard]

:^O

 

[kme]

Well spotted on the crimper.

Voltstick I was classifying with metering (sorry - getting tired)

Never posessed a lockoff for domestic.

and what the heck is a cahp wiz? I think it may be a welsh swear word that admin hasn`t put into the blocker. :^O :^O

Gettin tired now. see you later guys (and Mrs. Admin)(Who should be made an "honorary guy" while on the forum)

Bye,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,

 

[welshwizard]

Ratchet Cripmers.

Tired. Me too mate. I'll bid you all a "Good Morning".

 

[SPECIAL LOCATION]

Never posessed a lockoff for domestic.

I only got some recently..

following a comment at my last inspection assessment..

one that locks over the toggle lever itself & one that slots though the little holes in the MCB..

less than a fiver each!

I did actually use one a few weeks back on a 17th compatible board I was doing...

I hadn't got all the stickers on, and had temp power on to keep some lights & fridge going as I worked around swapping circuits over..

Cuz of the way it was split across the two RCDs kept on getting myself confused with my upstairs & downstairs circuits etc..

so I ended up sticking a lock off on the circuit I was working on to stop me accidentally switching it back on until I had completed that days alterations..

I actually found it quite useful!