Main Earthing Conductor

[ADS]

[quote name='Lee

 

[Lee321]

yeah missed it Ads just looked at pg 13 only :_| :coat

document page 13 is page 14 in pdf viewer :^O

although the wording does contain "the new work" !!! where the existing tails are not new work ??????????????

 

[tom1]

It's a concrete floor mate. But thanks

put the rod outside and use the existing 4mm?

 

[ianmacd]

Black conduit along/up the house until you can get to a place to get into the house then in dline trunking once inside to blend it in.

It is a lot of work and if you think its too much then you need to walk away as it needs doing.

 

[m4tty]

put the rod outside and use the existing 4mm?

Good thinking mate. If I was to extend the 4/6mm cable what crimp would need to be used? Thanks again for all the replies.

 

[Lee321]

matty not the way especially with your EARTHING CONDUCTOR

 

[Lee321]

matty not the way especially with your EARTHING CONDUCTOR.

better to mount a earth block next to the cutout and we'll call that the dno means of earthing. then go from there.

waits for the brigade of thats not right/you can't and its a joint eitherway.

well from my point of view the crimp is going to somehow get hidden and god forbid it came undone. where as the one on view will get inspected

:run

 

[m4tty]

If it would be crimped it would be next to the mainfuse. But if an earth block is ok that could work. Cheers

 

[Lee321]

post above

 

[m4tty]

[quote name='Lee

 

[Lee321]

 

[Lee321]

btw if you TT ing it. it may need rcd from the cutout!

waits for clarification not sure on that. where is andy tonight

 

[steptoe]

[quote name='Lee