- Joined
- Feb 12, 2008
- Messages
- 1,653
- Reaction score
- -1
Hi Biker Mike if you press & hold the " ctrl " bottom down and then use the scroll on the mouse, you will be able to zoom in and out as it were.jamie can u make the pics bigger ? or do i have to download them ?
Great Stuff, Alec.Cheers made one on the cheap: double plastic socket box from Wilkinson along with 2 5amp 12 way terminal strip screwed into box.Ordered the resistors-fitted into the box without the need to cut them.
The parallel resistors soldered them together before fitting them.
Just added blanking plate when not in use.
What did you use to hold your connector strip to the pattress Alec? ?:|A picture of my check boxhttp://i299.photobucket.com/albums/mm304/21photo/Picture014.jpg
The Parts Order List (From Maplin)
Plan B - use a non-RCD socket, and put an RCD in your checkbox.For RCD reference checking, use a common (the same) socket in your own home (assuming you have RCD protection)..This ideally should be done after calibration (and on a regular basis)..
Log results in a nice table...
Enter your email address to join: