Sorry for the newbie question.
Would be grateful for some help in hardwiring a cooker, Zanussi ZCV621MW with a double oven.
The back terminal board looks like this:
And the mains connection in the box looks like this:
The manual recommends the cable of 6mm2 and provides a scheme like this:
I am total newbie in this, so not even sure what kind of cable do I need. Is it Twin & Earth and do I need to then need to split Live into two and Neutral into three as shown?
I am also guessing I need to replace the mains box for a proper junction box, otherwise the cable can't come out nicely?
I realize it would be better to get an electrician to do it, but I got quoted £40 by two guys each for a few minute job because they charge for at least 1 hour when called out. And since I am on a tight budget, I am set to do it myself.
Thanks in advance.
Would be grateful for some help in hardwiring a cooker, Zanussi ZCV621MW with a double oven.
The back terminal board looks like this:
![CGdc7RQ.jpg](https://proxy.imagearchive.com/570/57022f6d9c366c11e7ea4774b02e372f.jpg)
And the mains connection in the box looks like this:
![e3LMRyr.jpg](https://proxy.imagearchive.com/fee/fee0d6a616343cfd12f14355feae3da0.jpg)
The manual recommends the cable of 6mm2 and provides a scheme like this:
![awKl6U5.jpg](https://proxy.imagearchive.com/988/9885e9261f546c48f554b85dbbd536a6.jpg)
I am total newbie in this, so not even sure what kind of cable do I need. Is it Twin & Earth and do I need to then need to split Live into two and Neutral into three as shown?
I am also guessing I need to replace the mains box for a proper junction box, otherwise the cable can't come out nicely?
I realize it would be better to get an electrician to do it, but I got quoted £40 by two guys each for a few minute job because they charge for at least 1 hour when called out. And since I am on a tight budget, I am set to do it myself.
Thanks in advance.