Rc Vf 7Xr Cp Zoning And Cc 5Xr Zoning Spur

[r.b]

today i did a combi it was down as cc 1xr 3xv it was just a wireless stat and programmer the ones I have mentioned in the title are my am and pm jobs.It mentions zoning in it will someone tell me what this is so I have an idea of what to do!Will I need a drawing?

 

[NozSpark]

today i did a combi it was down as cc 1xr 3xv it was just a wireless stat and programmer the ones I have mentioned in the title are my am and pm jobs.It mentions zoning in it will someone tell me what this is so I have an idea of what to do!Will I need a drawing?

As opposed to zoning out :z

 

[Andy™]

 

[betty swollocks]

I can do a pretty good drawing of a horse ....... The best bit is if you turn it upside down it looks like a rabbit!

 

[Evans Electric]

!

 

[SPECIAL LOCATION]

today i did a combi it was down as cc 1xr 3xv it was just a wireless stat and programmer the ones I have mentioned in the title are my am and pm jobs.It mentions zoning in it will someone tell me what this is so I have an idea of what to do!Will I need a drawing?

The best thing for a Rc Vf 7Xr Cp Zoning And Cc 5Xr is to use the XL5 configuration...

https://www.youtube.com/embed/6ifS2nP53Zs?feature=oembed

 

[SLIPSHOD & SLAPDASH]

Try X3-9/DDI 73. If that doesn't co voltipate swap the P3s with the am 99.

 

[SPECIAL LOCATION]

Or if in doubt...

Deke always swears by the WD-40!

 

[Andy™]

Or if in doubt...

Deke always swears by the WD-40!

 

[kerching]

I found the last time I did one of these the problem was within the OEMs source code for the interfrace . They had only used the CP/M action PIP. Instead of the more usual P1P, LOL....can you imagine it

 

[r.b]

xl5 config ?look what exactly is this boiler im going to be doing what do I need to look for

 

[Sharpend]

The instruction manual?

 

[SLIPSHOD & SLAPDASH]

it all depends if its a series 2 or 3 and has double value outputs.

 

[r.b]

Right to be honest a think i am going to have a long day tomoz so what do I need an xl5 config drawing?

A need help look I have done combis, y plans etc is it going to be anything like this and do I need a drawing before I leave the office

 

[NozSpark]

IMHO you need to ask your boss to put you with someone who knows what they're doing

 

[kerching]

Try contacting Steve Zodiac he may be able to assist

 

[ProDave]

 

[SLIPSHOD & SLAPDASH]

Not sure if this site goes to your capability   http://www.dummies.com/how-to/home-garden/home-improvement/interiors/electrical-lighting.html

 

[r.b]

Well I ask a question and I dont seem to get an answer may be I should have a word with the boss

What time will I get home tmoz midnight! I will ask the boss about it

 

[Sharpend]

Not sure what Bruce can do for you but you can try anything I suppose!