On the photos I showed of my new Enclosure range, the Main Switch was to the extreme left for the ENC-4S and ENC-6S. I left one space to the left on the ENC-9S and two spaces to the left of the Main switch on ENC-12S and ENC-18S. This was mainly to accomodate the tails, which quite often come in at the left and bent round to the right and into the Main Switch. However, the gap behind the DIN rail and the high terminal positions on my devices, means there is maximum room behind the DIN rail for the tails. This means the ENC-9S can have 7 ways, the ENC-12S can have 10 and the ENC-18S can have 16 ways.
Attached is a photo of a ENC-4S, showing how easy it is to run the tails behind the DIN rail, especially if you remove the DIN rail first. I am expecting stocks of the 9, 12 & 18 ways enclosures first week in May, although I still intend to stock the MK range.
By the way, this is just a mock-up photo and I only had 25mm brown!!.
Attached is a photo of a ENC-4S, showing how easy it is to run the tails behind the DIN rail, especially if you remove the DIN rail first. I am expecting stocks of the 9, 12 & 18 ways enclosures first week in May, although I still intend to stock the MK range.
By the way, this is just a mock-up photo and I only had 25mm brown!!.
Last edited by a moderator: