Spur

[r.b]

Well what can I do then do away with the sw fused spur and put a 3 amp in that

In the rcd spur that is

 

[Andy™]

Well what can I do then

get the yellow pages, go to 'electrician' section, call someone and let them do the job

 

[matt.leung]

agree with andy..

 

[r.b]

Thanks il just put the rcd spur on and do away with the sw fused spur

 

[matt.leung]

do u have the correct testing equipment to complete the certificate at the end of the job etc....

amd know how to use it???

 

[NozSpark]

Nozspark I have looked it up in the regs and it shows the spur between a leg in to an fcu in 2.5 out of that feeding 2 sockets in 1.5 So I would say yes the way I said was ok.End of the day Im asking a question yes I will do anything to make it rcd change the breaker over on to the rcd side in a more up to date board.The one I mentioned is re-wirable on some i put the rcd spur at the board these are seperate boiler circuits though. 

Well I'll tell you what seeing as you obviously have such a poor grasp of the regulations, just send me the address and I'll go and do the job for you,, or maybe you should look for someone more local

 

[Sharpend]

RB you are not doing yourself any favours by not answering the questions as put to you by the members yet you expect your questions to be answered? I would say that you are bordering on the verge of cowboy/diyer with the level of respect that you fail to show those that are trying to assist you. There is nothing wrong with asking a question albeit basic if you are honest as to your abilities in the first place. Too many people these days think that a qualification or reference book makes them qualified to real world scenarios, why people can't be honest is beyond me, is it an insecurity thing? With honesty comes respect which is a two way thing.

Just advising!!

 

[SLIPSHOD & SLAPDASH]

rb,  i think your best off using these for all of your jobs. I checked out and its ok for them to have UK spec ends fitted

http://www.thinkgeek.com/stuff/41/wec.shtml

 

[kerching]

I will shortly be posting a question on Dahlander Winding. As I know nothing about it I will heed all advice given and possibly ask a few more questions before committing myself and connecting said machine.

Just saying.......