i have two way lighting in my lounge/dinning room, ie, two light switches in both rooms, so any the lights can be switched on and off any room. her in doors brought a dimmer for the lounge so i proceeded to change the original switch 2 commons at the top, and a 1 way and 2 way for each switch. it was wired using twin and earth from the ceiling rose in the lounge and 3 core and earth for the rest the cables are going at the moment grey to common one switch has two brown wires going to the 2 way terminal on the one switch and the 2 way terminal has a the neutral from the rose and a switched live. the other side of the switch again has a grey common, one brown cable going to the 1 way and one switched live going to 2 way terminal. the new dimmer has 1 common for each side one L1 and one L2 on each side, the commons are ok, but the rest i connected as L1 would be 1 way and L2 would be 2way, but it doesnt work. the switch was taken back and exchanged but the new one had the same results, what the hell am i doing wrong....
cheers andy..
cheers andy..