SJones
Member
- Joined
- Oct 14, 2023
- Messages
- 6
- Reaction score
- 4
I'm trying to fit a tapo smart light switch, 2-gang 1-way, but the wiring on my current switch doesn't make sense to me.
This is my current switch which works correctly
I am a complete amateur at electrical wiring but this is not what I expected to see, I expected the 2 commons to bridged not the L1 line outs, but this works so it must be correct.
The Tapo switch is different any way, with 1 Lin and 2 Louts,
which I thought I understood and I intended to connect both commons to Lin and the L1 line outs to L1 out and L2 out respectively but because the original isn't wired as I expected I've now lost all confidence in trying to complete the job.
Any help would be appreciated.
This is my current switch which works correctly
I am a complete amateur at electrical wiring but this is not what I expected to see, I expected the 2 commons to bridged not the L1 line outs, but this works so it must be correct.
The Tapo switch is different any way, with 1 Lin and 2 Louts,
which I thought I understood and I intended to connect both commons to Lin and the L1 line outs to L1 out and L2 out respectively but because the original isn't wired as I expected I've now lost all confidence in trying to complete the job.
Any help would be appreciated.