ceiling flush pir sensor

[m4tty]

Hi,

Can anyone recommend a decent flush mounted pir sensor to switch downlights and standard pendants ?

Thanks

 

[alpha spark]

U tried danlers not too expensive and look ok

 

[m4tty]

Hi was looking at 360

 

[sb_89]

They do normally require a neutral.

If you loop in and out at the light fitting, you can just take a 3core and earth to the sensor from the fitting, using 2 corrs for line and neutral and the 3rd core as a switch wire back.

 

[Evans Electric]

I've only fitted the MK ones M4tty . Had no problems with them. They come prewired with a short 3 core flex, L-N-SL so they need a small JB . Something like a 2" hole in ceiling , spring clips like a downlighter hold it in place.

 

[Badfish]

Always use the Danlers one my self, they seem to be more flush the others. They also come pre wired with L N + SL.

 

[Steve3948]

If switching Low Energy a Danlers CAPLOAD may be required. The 2 Wire square plates can be ceiling mounted but are a lot bigger and not as flush as the round version.

 

[wozz]

Had problems with the CP ones and have crappy connections, stick to danlers even though im loosing faith with some of their products.