pitchshifter182
Member
I've bought a cheap ebay auto dialer pir alarm. The way its designed to work is once set, if the built in pir detects movement, the dialer is activated. There are contacts at the back of the unit for an external sensor. I have a response HW8 wired alarm setup, the unit includes a communicator pcb with the following terminals. +13v, 0v, fire, pa, int, set and abort. My question is this, could I wire up the ebay dialer, so that when the house alarm is activated the dialer kicks in, bypassing its own built in pir? I assume I could just tape the pir lens and use the external connections but where abouts on the response panel would I be best to terminate to?
Any help greatly appreciated
David
Any help greatly appreciated
David