Havells RCBO?

[Sharpend]

Team, I am looking for a Havells 20A type C RCBO for the PowerSAFE range, seems like there equivalent is hens teeth, any help much appreciated

(@kerching just have a look in the back of beyond in any one of your sheds!!)

thanks ALL

 

[SPECIAL LOCATION]

Sorry I can't help....

I think I stand a better chance of scooping a couple of buckets of unicorn pooh onto our compost heap after they have been grazing in the back garden overnight!!

But I will use it as an excuse to pour another pint and wish you well in your quest...

 

[mort2376]

Separate dp rcd installed next to the board in its own enclosure ?

That would provide the protection you require.

 

[grumpyjohn01]

Team, I am looking for a Havells 20A type C RCBO for the PowerSAFE range, seems like there equivalent is hens teeth, any help much appreciated

(@kerching just have a look in the back of beyond in any one of your sheds!!)

thanks ALL

I fitted a Havells Powersafe DB for a commercial customer just before they pulled out of the UK market without any real warning. I hastily purchased a few likely spares including I believe one of the ones you are after, doubtful he will part with it though..but I will ask.
I know its not approved of in high-minded circles but iirc they are virtually identical to the Wylex equivalent as Wylex at that point was manufactured by Havells. Also you might be able to order one from India as I think they are still available there...interesting challenge..

 

[kerching]

Well, before this post gets deleted, no sorry
Never even seen one

 

[Murdoch]

So a new cu then

 

[Sharpend]

So a new cu then

It’s in a school!! Budget isn’t there apparently.

 

[Sharpend]

Well, before this post gets deleted, no sorry
Never even seen one

You remind me of an old old joke. Something along lines of ‘now you see me now you don’t’ can’t repeat rest for fear of self incrimination!!

 

[Murdoch]

It’s in a school!! Budget isn’t there apparently.

And this is where the rules on mix and match go badly wrong. Especially as it’s still happening a lot

What would you do if you needed an urgent fix?

 

[Sharpend]

I know your point but this is a new circuit. So I’m thinking of the mcb external rcd route just I’m pushed for space external to board!!

 

[mort2376]

What's it powering ? Does it need rcd protection ?

 

[Sharpend]

An external lift.

 

[Sharpend]

I haven’t seen the spec for lift as really at this time I’m not officially involved, no contract agreed.
Have been asked to take a visual purely for install requirements. Just been told it needs a 20A ctype rcbo, now whether that person knows what they talk off ??

 

[kerching]

now whether that person knows what they talk off ??

Careful now! I Criticised someone and alluded to them being a follower of Onan

 

[truffle pig]

try here
https://www.pclgib.com/havells-rcbo-20a-type-c-sp-6ka-good luck

 

[Sharpend]

Never been to Gibraltar!

 

[mort2376]

Wire in swa. Fit rcd local to lift. Space should not be an issue.

 

[Sharpend]

Wire in swa. Fit rcd local to lift. Space should not be an issue.

That’s plan b. Would then need the 20a type c mcb

 

[mort2376]

Type C Havells mcb

here or plenty on ebay !

 

[grumpyjohn01]

try here
https://www.pclgib.com/havells-rcbo-20a-type-c-sp-6ka-good luck

Pretty sure thats the 6KA version for the 'Homesafe' range of domestic boards...fitted a handful of these boards as well... much to my chagrin...try finding any bits for the short lived 'Newlec' version of those..the sparkly paintjob drew me in...